### [爱快软路由配合手机+专属AP实现单机单IP完整教程 | 详细步骤图解](https://www.jiyueip.com/article/1246)

**Published:** 2026-01-17T07:57:45

**Author:** 斑斓

**Excerpt:** 爱快软路由手机单机单IP配置教程 准备工作 将AP插入爱快软路由LAN1口（已预设置，无需额外配置） 手机连接AP发射的WiFi信号（必须先连接软路由发射的WIFI信号） 方法一：MAC地址绑定实现单机单IP 1. 登录爱快后台 浏览器访问

## 爱快软路由手机单机单IP配置教程

### 准备工作

1.  将AP插入爱快软路由**LAN1口**（已预设置，无需额外配置）
2.  手机连接**AP发射的WiFi信号**（必须先连接软路由发射的WIFI信号）

### 方法一：MAC地址绑定实现单机单IP

#### 1\. 登录爱快后台

1.  浏览器访问**192.168.9.1**
2.  输入用户名密码登录

#### 2\. 查看手机MAC地址

1.  左侧菜单选择**“状态监控”→”终端监控”→”IPV4”**
2.  找到您的手机设备，点击查看**MAC地址**并复制

![20260117155727977](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155727977.png "20260117155727977")

![20260117155727539](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155727539.png "20260117155727539")

#### 3\. 创建MAC分组

1.  进入**“网络设置”→”终端分组设置”→”MAC分组”**
2.  点击**“添加”**，填写分组名称
3.  粘贴复制的MAC地址

![20260117155727859](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155727859.png "20260117155727859")

![20260117155727255](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155727255.png "20260117155727255")

![20260117155727600](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155727600.png "20260117155727600")

#### 4\. 设置端口分流

1.  进入**“流控分流”→”端口分流”**
2.  选择已导入的**L2TP协议**或本地宽带

![20260117155729777](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155729777.png "20260117155729777")

![20260117155729811](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155729811.png "20260117155729811")

![20260117155729582](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155729582.jpg "20260117155729582")

![20260117155729443](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155729443.png "20260117155729443")

#### 5\. 绑定分组

1.  在**IP/MAC分组**中选择刚创建的手机分组
2.  点击**“加入”→”保存”**

![20260117155729675](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155729675.png "20260117155729675")

![20260117155731172](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155731172.png "20260117155731172")

#### 6\. 验证IP

1.  手机访问**ip138.com**
2.  确认显示**L2TP协议的IP地址**

![20260117155731610](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155731610.png "20260117155731610")

### 方法二：固定内网IP实现单机单IP

#### 1\. 查看手机MAC地址（备用方法）

1.  手机WiFi设置→点击已连接AP右侧的**“!”**
2.  记录**“无线局域网地址”**（即MAC地址）

![20260117155731696](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155731696.png "20260117155731696")

![20260117155731220](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155731220.png "20260117155731220")

#### 2\. 设置固定内网IP

1.  手机WiFi设置→IP设置改为**“手动”**
2.  输入固定IP（如**192.168.9.x**，x为2-255）
3.  子网掩码：默认
4.  网关：**192.168.9.1**

![20260117155731778](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155731778.png "20260117155731778")

![20260117155732421](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155732421.png "20260117155732421")

#### 3\. 配置DNS

1.  主DNS：**114.114.114.114**
2.  备用DNS：**115.115.115.115**

![20260117155733574](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155733574.jpg "20260117155733574")

![20260117155733425](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155733425.png "20260117155733425")

#### 4\. 设置端口分流

1.  爱快后台→**“流控分流”→”端口分流”**
2.  选择已导入的**L2TP协议**

![20260117155733599](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155733599.png "20260117155733599")

![20260117155733475](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155733475.png "20260117155733475")

![20260117155734928](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155734928.png "20260117155734928")

![20260117155734783](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155734783.png "20260117155734783")

#### 5\. 绑定固定IP

1.  在**IP/MAC分组**中添加手机固定IP
2.  点击**“加入”→”保存”**

![20260117155734260](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155734260.png "20260117155734260")

![20260117155735962](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155735962.png "20260117155735962")

#### 6\. 验证IP

1.  手机访问**ip138.com**
2.  确认显示**L2TP协议的IP地址**

![20260117155735597](https://img.jiyueip.com/wp-content/uploads/2026/01/20260117155735597.png "20260117155735597")

### 使用技巧

-   **✅ 方法选择：**两种方法任选其一即可实现单机单IP
-   **✅ 设备管理：**可为不同设备创建独立分组
-   **✅ IP验证：**通过ip138.com实时验证IP变更

### 常见问题

-   **Q：为什么看不到我的设备？**  
    A：确保手机已连接AP的WiFi，刷新终端监控页面
-   **Q：IP没有变化怎么办？**  
    A：检查端口分流设置是否正确，确认L2TP协议已正确导入
-   **Q：可以同时使用两种方法吗？**  
    A：不建议，选择一种方法即可

### 注意事项

-   **⚠️ 合法使用：**本教程仅限合法用途使用
-   **⚠️ IP扩展：**如需扩展DHCP地址范围，可参考后续教程
-   **⚠️ 配置保存：**每次修改后务必点击保存

**Categories:** 代理IP, 使用教程, 软路由/L2TP 使用教程

---